ReEmber — third-party notices three.js Source: https://github.com/mrdoob/three.js License: MIT (full text in vendor/three/LICENSE) Copyright: three.js authors Vendored at vendor/three/ (core module, OrbitControls, TransformControls, the bloom post-processing passes and their shaders), consistent with this app's no-build-step architecture. IBM Plex Mono License: SIL Open Font License 1.1 (full text in vendor/font/PLEX_OFL.txt) Vendored at vendor/font/ with the family symbol face built from it. Printer model assets/printer.bin.gz and assets/inner.bin.gz are derived from the printer maker's published mechanical CAD (Creative Commons Attribution-ShareAlike 4.0), via the part-by-part STL export in github.com/dingzeyuli/ember-CAD-model. Changes: printer.bin.gz thinned to about 137,000 triangles, screws and internal parts removed, regrouped and recoloured, the maker's marks removed; a build face, chin plate and screen added in the app. inner.bin.gz holds the internal parts, thinned to about 63,000 triangles and regrouped by finish. Those model files are shared under the same licence, CC BY-SA 4.0 (https://creativecommons.org/licenses/by-sa/4.0/). The build script is _dev/tools/machine/. Methods The support trees follow the published idea of growing branches down the intersections of cones (Vaněk, Galicia, Benes, "Clever Support: Efficient Support Structure Generation for Digital Fabrication", Computer Graphics Forum 2014); ray–triangle tests follow Möller and Trumbore (1997); closest points on triangles follow Ericson, "Real-Time Collision Detection" (2005). No code from those works or from any slicer is used. Printer compatibility ReEmber writes the print file format and speaks the HTTP interface of the Ember printer's open firmware (GPL), as documented in that firmware's source; none of its code is included. Ember is a trademark of its owner. ReEmber is an independent tool, not affiliated with or endorsed by the printer's maker.